4 - 7 times / hour PLC automatic control Rubber Internal Mixer Tilt type Dispersion kneader rubber mixer

1. Introduction of Product
26-45kg/unit 55KW-6P Occlusal Pattern NL-35L Dispersion Kneader For Rubber

2. Description:

• This equipment possesses temperature and time control sysytem for easy, but accurate operation and best decentralization.
• Tilt-able mixing chamber and mechanical shaft sealing design for easy cleaning and colour changing.
• Pressure sealed mixing chamber to assure the quality of mixed material and also prevent environment pollution.
• The mixing chamber is made of soud alloy steel and the work surface is hare chromin coated for supper anti-abrasion.

3 . Equipment list

• Main body one
• Pressure device one
• Discharging device one
• Rigging device one
• Matched pipe one
• Electric control one

Project Name specification

1. Application for rubber mixing

2. Effective capacity 40L

3. Total capacity 55L

4. Feeding type: feeding from back and front (design according to client’s demand)

5. Temperature adjustment water cooling or other

6. Capacity for one batch about 45-75kg(according to production technology)

7. Time for one batch 5-10min

8. Main motor 110KW AC

9. Rotor type three-corner fan

10 Mixing axle speed 0-45rpm(transducer)

4. Applications:

It is widely used to mix the rubber, plastics and other rubber & plastics material.

5. Main Technical Parameter:

6. Competitive Advantage:

Easy to clean chamber and chamber and changing colors; In 6-10 minutes/batch of output equivalent to 2 units of mixing mill; An automatic temperature and time control system to provide a 100% mixing effect; Pressurized and sealed mixing chamber to provide high mixing performance and prevented environmental pollution.

7. Service:

1. Oversea installation guide.
2. Oversea test running
3. Oversea worker training
4. Technical support
5. supply of spare parts
6. Technical operation support
7. Formula and processing support

8. Option
Two rotors mixer the relative rotation, the material from the feed mouth clamp into the roll gap by rotor extruding and shearing, after through the roll gap above the top tied pien is divided into two parts, respectively along the chamber wall and the gap between the rotor before and after the return to roll gap above.In a week around the rotor flow, material is influenced by the shear and friction action, make rubber temperature rise sharply, lower viscosity, increased the wettability on the surface of the rubber in the compound, make good contact with rubber and compound surface.

9. commercial terms
1. Payment: 30% by T/T as advance payment, balance(70%) by T/T before shipment
2. Lead Time: 60 days after receiving the advance payment
3. Transportation: container, simple package ( PE film, salver)
4.Warranty period: From the day of the use of the machine in the buyer’s factory:
(1) The mechanical Parts: 12 months
(2) The electrical Parts: 6 months
5. Installations and Commissioning
(1)Commissioning will have been made before shipment
(2)Overseas Commissioning and charges
one or two technicians will be sent to the buyer to guide the installation and commissioning of the equipment if the customer requests.
Customers need topay the charge of our technicians.
(1)Round-trip Airplane Ticket
(2)Charges of transportation, accommodation and communication
(3)The allowance for the technicians is USD 80 per day for one person.
(4)An interpreter is needed.
6. Spare parts:
Spare parts for one year are needed for the customers, and we suggest that customers should buy the spare parts. (Fittings list will be provided.)
7. English manual, Figuration drawing and footing drawings are provided.